Remove 4″ – 6 ” of soil. Inside and outside elevations are set with 1×4 bender board.
Scratch out your desired paver shapes in the soil. After you have the layout complete, solidify your pavers with marking paint.
Utilize 1×4 recycled plastic and 1/4″ massonite to form your pavers. Stringline you elevations as you go, ensuring proper grade.
Continue to form your pavers, while placing wire mesh within. Care is taken to allow working space and wheelbarrows for first pour.
First pour is initiated and skreted. Round the edges toward the form with trowel. This will give a rounded edge when stamping.
Stamp out the pavers utillizing differernt textures form RockMolds to create randomness between the stones. Overlap and feather seams.
Continue forming for second pour. Ensure elevations transistion smoothly between pavers.
Pavers are final colored with alcohol stains. Blacks, browns and grays utillized here. Seal.
Inline drip line, with packed sand and Bermuda seed are then installed.
Stay Updated: subscribe our special newsletter
RockMolds.com featured in Landscape Contractor magazine August 2012 starting on page 22. http://landscapecontractor.epubxp.com/i/77439
Check RockMolds.com out on the cover of Concrete Decor magazine, June/July 2009 issue! A recent pool project utilizing RockMolds.com concrete stamps are showcased in the water feature editorial: www.ConcreteDecor.net
Powered by Goodsell Global